Gas Fitters Insurance from £9.20/month
From £9.20/month. Compare gas fitters insurance from 200+ UK insurers. Tailored cover, free quotes in minutes. FCA regulated broker since 1983.
Gas fitters and heating engineers need public liability that covers gas work and heat, employers' liability, tools cover and contract works for installations. The gap we see most is Gas Safe scope: insurers expect every engineer to be registered for the appliances they work on, and work outside an engineer's registered categories can leave a claim unpaid.
Cover this trade usually needs
| Cover | Why it matters | Typical limit |
|---|---|---|
| Public liability (gas and heat work) | Fire, explosion, carbon monoxide or water damage after an installation or repair. | £2m–£10m |
| Employers' liability | Engineers, apprentices and labourers. | £10m (legal minimum £5m) |
| Tools and equipment | Analysers, press-fit tools and stock in vans. | Replacement value |
| Contract works | Boilers and systems damaged before handover. | Largest job value |
| Professional indemnity | System design and specification advice. | £100k–£1m |
Key risks
- Carbon monoxide poisoning after a flue or appliance fault.
- Fire or explosion linked to a gas leak.
- Escape of water from new heating pipework.
- Heat work causing fire in roof spaces or under floors.
- Engineer working on appliances outside their Gas Safe categories.
Regulations and licences
- The Gas Safety (Installation and Use) Regulations 1998 require gas work to be done by a Gas Safe registered business and engineer.
- Landlords' annual gas safety checks must be carried out by a Gas Safe engineer.
- Building Regulations require notification of new boiler installations.
- Hot work and confined space rules apply on commercial sites.
What we check before quoting
- Your Gas Safe registration and the categories each engineer holds.
- Domestic, commercial, LPG or boat and caravan work.
- Heat sources used and any hot work permit conditions.
- Turnover split between installs, servicing and landlord certificates.
- Sub-contractors used and whether they are registered.
Gaps we see most often
- Heat work exclusions or conditions not followed.
- Commercial or LPG work not declared.
- No cover for damage to the boiler being installed.
- Tools in vans excluded overnight unless removed.
Limits clients and contracts usually ask for
- Public liability commonly £2m–£5m domestic and £5m–£10m commercial.
- Employers' liability £10m.
- Professional indemnity for design work £100k–£1m.
Key facts and sources
- Under the Gas Safety (Installation and Use) Regulations 1998, anyone working on gas fittings for gain must be a member of the approved class of persons — the Gas Safe Register. legislation.gov.uk — Gas Safety (Installation and Use) Regulations 1998
- HSE's provisional figures record 126 workers killed in work-related accidents in Great Britain in 2025/26, with construction and agriculture together accounting for over a third, and falls from height the most common kind of fatal accident at around a quarter. HSE — Work-related fatal injuries in Great Britain, 2026
Common questions
- Do I need Gas Safe registration to get insured?
- Yes. Insurers will expect you to be on the Gas Safe Register, and each engineer needs the categories for the work they do. Work outside those categories may not be covered.
- Does public liability cover carbon monoxide claims?
- It can respond to injury caused by your work, including CO, subject to the policy terms. Insurers will ask about your commissioning and record-keeping.
- Are landlord gas safety certificates covered?
- Yes, if declared. Inspection and certification work is a liability risk of its own, so make sure it is part of your business description.
- What limit do commercial clients ask for?
- Commercial clients and facilities managers commonly ask for £5m or £10m public liability. Domestic work is often fine at £2m.
Gas fitters insurance — commercial trade cover from a UK broker
If you work as a gas fitters contractor in the UK, the right insurance programme depends on who hires you, what you carry on site, and the contract terms you're asked to sign. Premier Insurance has been broking trade and contractor risks since 1983, and we structure cover around the way you actually operate — main-contractor work, sub-contracted labour, principal-contractor duties, or direct-to-client jobs. Speak to a real broker on 020 8908 2426 or message us on WhatsApp 07954 331362.
What gas fitters cover typically includes
Cover for gas fitters contractors can include any of the elements below. Not every policy carries every section, and limits, conditions and excesses vary by insurer and risk — we use the conversation to scope what you actually need:
- Public liability — third-party injury or property damage arising from your work; limits are commonly arranged from £1m, with higher limits available where a contract specifies them.
- Employers' liability — legally required in the UK if you employ staff, including most labour-only sub-contractors; the statutory minimum is set by the Employers' Liability (Compulsory Insurance) Act 1969.
- Contract works / contractors' all risks — physical damage to the works in progress and to your own materials on site.
- Own plant and hired-in plant — cover for owned equipment and for the continuing-hire liability on plant you hire in.
- Tools cover — theft or damage to hand and power tools, usually with conditions on overnight storage and vehicle security.
- Professional indemnity — where you take on any design, specification or design-and-build element.
- Personal accident — weekly benefit and capital sums for the principal and key staff, useful where there is no contractual sick pay.
Risks we see most often in gas fitters work
Common claim triggers in this trade include third-party property damage on a client's site, sub-contractor injuries, theft of tools from vans or lock-ups overnight, and damage to a principal contractor's works in progress. These are general sector observations, not statements about any specific policy — what your own cover responds to is governed entirely by your policy wording and the contract you signed.
Why brokered cover beats price-comparison sites
Comparison sites push you toward the cheapest premium, not the policy that pays. Premier's brokers read the wording, flag exclusions before you buy, and stay involved at claim time. Rated 4.9 on Google · 100+ reviews, and a full BIBA member. For a tailored gas fitters quote, request a callback or email hello@premier-insurance.co.uk.
Related trade insurance from Premier
- Loft Conversion Insurance — Project cover for loft conversion specialists
- Carpenters Insurance — Tools, liability and PI cover for carpenters and joiners
- Drywall Insurance — Cover for drywall and plastering contractors
- Road Surfacing Insurance — Cover for tarmac and road surfacing contractors
- Fencing Contractors Insurance — Public liability for fencing and boundary contractors
- Plumbers Insurance — Public liability and professional cover for plumbers
Speak to a UK insurance broker
Our brokers are available Monday to Friday 9am to 5:30pm. Call 020 8908 2426, message us on WhatsApp 07954 331362, or email hello@premier-insurance.co.uk. Visit our office at 49 Grosvenor Street, London, W1K 3HP. You can also request a callback or learn more about our team.