Kitchen Fitters Insurance from £9.00/month
From £9.00/month. Compare kitchen fitters insurance from 200+ UK insurers. Tailored cover, free quotes in minutes. FCA regulated broker since 1983.
Kitchen fitters need public liability covering damage to the property being worked on, declared plumbing and electrical work, and contract works cover for the units and worktops you supply. The expensive claims are water damage from appliance connections and damaged worktops — both need the right wording.
Cover this trade usually needs
| Cover | Why it matters | Typical limit |
|---|---|---|
| Public liability | Damage to clients' property and injury during fitting — water damage is the classic claim | £2m–£5m |
| Employers' liability | Legal requirement for staff and most labour-only subcontractors | £10m (legal minimum £5m) |
| Contract works | Units, worktops and appliances on site damaged or stolen before handover | Matched to largest kitchen value |
| Tools and equipment | Saws, routers and kit stolen from vans | Full replacement value |
| Professional indemnity | If you design layouts or specify structural alterations | £250k–£500k where design is done |
Key risks
- A badly connected appliance or pipe floods the kitchen — often discovered after you have left.
- A granite or quartz worktop cracks during fitting — a £2,000+ replacement.
- You cut through a hidden cable or pipe behind a wall.
- Units and appliances are stolen from the property before handover.
- A wall removal or structural alteration you specified causes problems.
Regulations and licences
- In England, domestic electrical installation work must comply with Part P; notifiable work requires the appropriate certification or building-control route. Other UK nations have their own rules.
- Gas Safe registration is legally required for any gas hob or boiler work.
- In Great Britain, CDM 2015 applies to construction projects regardless of size, including domestic work; domestic client duties normally transfer to the contractor or principal contractor.
What we check before quoting
- Whether you connect appliances, move plumbing or do any electrical work.
- Any gas work — it must be Gas Safe registered and declared.
- Whether you supply the kitchen or only fit it.
- Structural work — wall removals, steel installations.
- The largest single kitchen value you handle.
Gaps we see most often
- Plumbing and electrical work not declared — the two activities behind most kitchen claims.
- Damage to property being worked on excluded.
- No contract works cover, so a stolen or damaged kitchen before handover is your loss.
- Gas work done without Gas Safe registration — illegal and uninsured.
Limits clients and contracts usually ask for
- Public liability £2m–£5m.
- Employers' liability £10m (the legal minimum is £5m).
- Contract works set at your largest single kitchen value.
Key facts and sources
- HSE's provisional figures record 126 workers killed in work-related accidents in Great Britain in 2025/26, with construction and agriculture together accounting for over a third, and falls from height the most common kind of fatal accident at around a quarter. HSE — Work-related fatal injuries in Great Britain, 2026
- The Construction (Design and Management) Regulations 2015 place legal duties on clients, designers and contractors on construction projects in Great Britain, including domestic work. Domestic client duties normally transfer to the contractor or principal contractor. legislation.gov.uk — CDM Regulations 2015
Evidence who approved the kitchen before anything was cut
Assemble the signed survey, appliance model numbers, service-clearance requirements and final layout before units or worktops are ordered. Record who measured, who checked dimensions and which drawing the customer approved. Keep a separate change log for late appliance substitutions and worktop cut-outs. This gives the broker a concrete distinction between fitting a retailer’s complete design and taking responsibility for measurements or compatibility that another contractor may later say were yours.
State whether worktops arrive finished, are templated by a specialist or are cut and polished by your team on site. Retain the subcontract order, handling plan and photographs of access routes and existing surfaces. HSE’s construction-dust task guidance gives Great Britain safety context for cutting and grinding; it is not an insurance specification. Ask the broker to review the actual fabrication process rather than accepting a business description limited to assembling cabinets.
For a rejected installation, divide the proposed remedy into correcting your measurement, replacing a damaged adjacent item, removing serviceable cabinets and meeting another trade’s attendance charge. Save the original template, delivery condition and written explanation of why dismantling is necessary. Matching discontinued door fronts may be a separate commercial dispute from physical damage. Discuss how defective work, access costs and resulting damage are differentiated in the wording, without assuming the entire refit is payable.
Trigger a fresh discussion before taking over templating, supplying bespoke stone, offering a single design-and-install price or accepting completion penalties from a developer. Give the broker the contract before signing, including responsibility for customer-supplied appliances and delay caused by unavailable parts. At handover, retain commissioning evidence and a list of unresolved snags. These records help establish what was actually delivered, but neither customer approval nor compliance paperwork determines an insurer’s response by itself.
For flat-pack kitchens supplied through a retailer, keep the retailer’s installer terms and the customer’s separate supply contract. Record who authorises replacement units, collects rejected items and pays for additional visits. A missing hinge, damaged cabinet on arrival and an error in your fitting work are different disputes. Present the broker with those responsibility boundaries rather than treating every customer complaint as an installation liability. Retain the delivery inspection before packaging is discarded.
When a project spans several visits, record how loose appliances, sharp worktop edges and incomplete electrical connections are left between attendances. Agree access restrictions with the occupier, particularly where the household continues using adjoining rooms. Keep photographs of the temporary condition and the written handover to other trades. If the customer uses an unfinished appliance early, preserve the instructions and chronology. Those records help distinguish pre-existing defects, installation work and subsequent interference without making assumptions about insurance recovery.
HSE — Construction dust: specific tasks (Great Britain)
Common questions
- Am I covered if a connection I made floods the kitchen?
- Public liability may cover resulting water damage if plumbing work is insured. Check water-damage, workmanship and property-being-worked-on exclusions, as well as limits and excesses; declaring the activity alone does not guarantee cover.
- Can I connect a gas hob?
- Gas hob installation must be carried out by a Gas Safe registered engineer qualified for that work. Do not undertake it without the required registration and competence. Insurance consequences depend on the policy and circumstances; it is not accurate to say that no policy could cover any resulting claim.
- A worktop cracked while I was fitting it — is that covered?
- Damage to the worktop being fitted needs a specific wording check. Public liability may exclude the item being worked on, even where damage to other property is insured. Ask about property-being-worked-on terms and contract works, and retain the supplier invoice and installation photographs; no fixed repair cost or claim payment can be assumed.
- Are the units covered while they're waiting to be fitted?
- Check contract works or materials cover for the period between delivery and completion. The contract determines whose risk the units are at each stage; record who supplied them, where they are stored and when ownership transfers. Insured interests, site security, transit and theft exclusions need separate review.
Kitchen fitters insurance — commercial trade cover from a UK broker
If you work as a kitchen fitters contractor in the UK, the right insurance programme depends on who hires you, what you carry on site, and the contract terms you're asked to sign. Premier Insurance has been broking trade and contractor risks since 1983, and we structure cover around the way you actually operate — main-contractor work, sub-contracted labour, principal-contractor duties, or direct-to-client jobs. Speak to a real broker on 020 8908 2426 or message us on WhatsApp 07954 331362.
What kitchen fitters cover typically includes
Kitchen fitters policies are usually built from a menu of the covers listed below. Which sections apply, and at what limits, depends on contract requirements, the kit you own and how you use sub-contracted labour:
- Public liability — third-party injury or property damage arising from your work; limits are commonly arranged from £1m, with higher limits available where a contract specifies them.
- Employers' liability — legally required in the UK if you employ staff, including most labour-only sub-contractors; the statutory minimum is set by the Employers' Liability (Compulsory Insurance) Act 1969.
- Contract works / contractors' all risks — physical damage to the works in progress and to your own materials on site.
- Own plant and hired-in plant — cover for owned equipment and for the continuing-hire liability on plant you hire in.
- Tools cover — theft or damage to hand and power tools, usually with conditions on overnight storage and vehicle security.
- Professional indemnity — where you take on any design, specification or design-and-build element.
- Personal accident — weekly benefit and capital sums for the principal and key staff, useful where there is no contractual sick pay.
Risks we see most often in kitchen fitters work
Sector-wide, the disputes that escalate fastest tend to involve unclear sub-contractor arrangements, work that strays outside the trades described on the schedule, and damage caused during heat-work, hot-cutting or working near existing services. The point of using a broker is to flag those exposures against the wording before a claim, not after.
Why brokered cover beats price-comparison sites
Comparison sites push you toward the cheapest premium, not the policy that pays. Premier's brokers read the wording, flag exclusions before you buy, and stay involved at claim time. Rated 4.9 on Google · 100+ reviews, and a full BIBA member. For a tailored kitchen fitters quote, request a callback or email hello@premier-insurance.co.uk.
Related trade insurance from Premier
- Flooring Contractors Insurance — Cover for flooring installation specialists
- Cladding Insurance — Specialist cover for cladding and facade contractors
- Fencing Contractors Insurance — Public liability for fencing and boundary contractors
- Cleaners Insurance — Public liability for commercial and domestic cleaners
- Painters & Decorators Insurance — Cover for painting and decorating businesses
- Roofers Insurance — Specialist cover for roofing contractors working at height
Speak to a UK insurance broker
Our brokers are available Monday to Friday 9am to 5:30pm. Call 020 8908 2426, message us on WhatsApp 07954 331362, or email hello@premier-insurance.co.uk. Visit our office at 49 Grosvenor Street, London, W1K 3HP. You can also request a callback or learn more about our team.