Cladding Insurance from £12.50/month
From £12.50/month. Compare cladding insurance from 200+ UK insurers. Tailored cover, free quotes in minutes. FCA regulated broker since 1983.
Cladding contractors need public liability at £10m for most principal contractors, professional indemnity for any design or specification input, and contract works for materials and work in progress. Since the Building Safety Act, many insurers exclude facade work entirely — the first thing we establish is which insurers will still write your exact scope.
Cover this trade usually needs
| Cover | Why it matters | Typical limit |
|---|---|---|
| Public liability | Injury or damage during installation — falling materials, water ingress from poor fixing | £10m usually required by principal contractors |
| Professional indemnity | Design, specification and material-selection advice you give or are deemed to give | £1m–£5m depending on project values |
| Employers' liability | Legal requirement — work at height is the core exposure | £10m (legal minimum £5m) |
| Contract works | Panels, insulation and work in progress damaged or stolen before handover | Matched to largest contract value |
| Plant and tools | Cutting and fixing equipment, access equipment you own | Full replacement value |
Key risks
- Water ingress behind incorrectly fixed panels causes long-term damage discovered years later.
- Materials fall from height and injure workers or the public below.
- A specified material proves unsuitable and the client claims the replacement cost.
- Fire performance of installed materials is questioned under post-Grenfell building safety rules.
- Work in progress is damaged by storm or vandalism before handover.
Regulations and licences
- Building Safety Act 2022 and the higher-risk building regime.
- Building Regulations Part B (fire safety) — materials and installation standards.
- CDM 2015 duties on construction projects.
- Work at Height Regulations 2005.
What we check before quoting
- Exactly which systems you install — rainscreen, render, curtain walling — and on what building heights.
- Any design, specification or material-selection input, even informal.
- Whether you work on higher-risk buildings (18m+ or 7+ storeys).
- Certifications held — CHAS, SafeContractor, system-manufacturer approvals.
- Your largest contract value and typical project duration.
Gaps we see most often
- Facade work excluded outright by a policy that was never told the true scope.
- Professional indemnity missing despite regular specification input.
- Fire-performance exclusions that remove cover for the exact risk the client is worried about.
- Retroactive cover lost when switching insurer — old projects left uninsured.
Limits clients and contracts usually ask for
- Public liability £10m — most principal contractors will not let you on site with less.
- Professional indemnity £1m–£5m.
- Employers' liability £10m (the legal minimum is £5m).
Key facts and sources
- HSE's provisional figures record 126 workers killed in work-related accidents in Great Britain in 2025/26, with construction and agriculture together accounting for over a third, and falls from height the most common kind of fatal accident at around a quarter. HSE — Work-related fatal injuries in Great Britain, 2026
- The Work at Height Regulations 2005 require work at height to be properly planned, supervised and carried out by competent people. legislation.gov.uk — Work at Height Regulations 2005
- The Construction (Design and Management) Regulations 2015 place legal duties on clients, designers and contractors on construction projects in Great Britain, including domestic work. Domestic client duties normally transfer to the contractor or principal contractor. legislation.gov.uk — CDM Regulations 2015
Retain an elevation-level record of the installed facade
Prepare an elevation register linking panel, insulation, cavity-barrier and fixing references to dated installation photographs and approved drawings. Record concealed interfaces before the next layer is closed and preserve the identity of the person approving any departure. A broker needs more than a product brochure: the installed combination and your role in selecting it matter. Keep manufacturer advice attached to the exact revision it addresses, rather than assuming later correspondence validates earlier site substitutions.
Separate removal-only contracts, like-for-like replacement, complete system specification and inspection of another contractor’s facade. State who owns the design at openings, compartment lines and transitions between systems. Approved Document B provides fire-safety building-regulation guidance for England, with editions and transitional arrangements requiring project-specific checking. It is not a UK-wide insurance standard, a product approval or evidence that an insurer accepts remediation work; ask the broker to review your precise appointment independently.
If an installed system is challenged, preserve samples, delivery references, inspection records and the technical basis of the allegation before agreeing a replacement programme. Split investigation, access scaffolding, removal of compliant sections, defective materials and improvements required by a revised design into separate cost headings. Claims about fire performance may arise without a fire or visible damage. Ask how the wording treats each allegation, including contractual warranties and associated professional appointments, rather than assuming property-damage cover answers everything.
Seek broker review before signing a collateral warranty, accepting inspection duties for historic installations or substituting a component because the specified one is unavailable. Provide the building location, project dates and contract language, not merely the maximum elevation. Ask whether the proposed promise to achieve a stated performance goes beyond your underlying appointment. Keep technical approvals and commercial instructions separate: a main contractor’s request to proceed does not establish either regulatory acceptability or an insurer’s agreement.
GOV.UK — Fire safety: Approved Document B (England)
Common questions
- Will insurers still cover cladding work?
- Specialist cover may be available, but acceptance depends on the exact scope, systems, building heights, certifications and insurer appetite. Full disclosure is essential but does not guarantee an offer or that a particular claim is insured.
- Do I need professional indemnity if I only install?
- If you ever select materials, advise on specifications or adapt a design on site, you have a design exposure whether or not you call it design. Many principal contractors now require PI from cladding subcontractors as a condition of the contract.
- What happens if a past project is questioned years later?
- Professional indemnity is claims-made: the policy active when the claim arrives responds. Keeping continuous cover with the same retroactive date is what protects your completed projects — we make sure switching insurer never creates a gap.
- Am I covered for work on high-rise buildings?
- Only if the policy says so. Higher-risk buildings (18 metres or 7 storeys and above) are a specific underwriting question, and many policies exclude them by default. Tell us the tallest building you work on.
Cladding insurance — commercial trade cover from a UK broker
Premier Insurance arranges Cladding cover for sole traders, partnerships and limited-company contractors working on UK sites. As an independent broker established in 1983 and a full BIBA member, we place risks with specialist trades underwriters across 200+ UK and Lloyd's markets — AXA, Aviva, Allianz, Hiscox, Zurich, RSA, QBE and Markel among them — and we read the policy wording before you sign. Speak to a real broker on 020 8908 2426 or message us on WhatsApp 07954 331362.
What cladding cover typically includes
A cladding insurance programme typically includes a combination of the following covers — the right blend depends on your contracts, headcount and on-site exposures, and we'll talk you through what applies before quoting:
- Public liability — third-party injury or property damage arising from your work; limits are commonly arranged from £1m, with higher limits available where a contract specifies them.
- Employers' liability — legally required in the UK if you employ staff, including most labour-only sub-contractors; the statutory minimum is set by the Employers' Liability (Compulsory Insurance) Act 1969.
- Contract works / contractors' all risks — physical damage to the works in progress and to your own materials on site.
- Own plant and hired-in plant — cover for owned equipment and for the continuing-hire liability on plant you hire in.
- Tools cover — theft or damage to hand and power tools, usually with conditions on overnight storage and vehicle security.
- Professional indemnity — where you take on any design, specification or design-and-build element.
- Personal accident — weekly benefit and capital sums for the principal and key staff, useful where there is no contractual sick pay.
Risks we see most often in cladding work
Across UK contractor portfolios, the recurring loss patterns are tool and plant theft (particularly from vans left on residential streets), damage to a client's existing structure during the works, and injury claims from sub-contracted labour with unclear status. None of these descriptions imply that any particular cover or exclusion sits on a named policy — that's always a wording question.
Why brokered cover beats price-comparison sites
Comparison sites push you toward the cheapest premium, not the policy that pays. Premier's brokers read the wording, flag exclusions before you buy, and stay involved at claim time. Rated 4.9 on Google · 100+ reviews, and a full BIBA member. For a tailored cladding quote, request a callback or email hello@premier-insurance.co.uk.
Related trade insurance from Premier
- Kitchen Fitters Insurance — Insurance for kitchen design and installation firms
- Gas Fitters Insurance — Cover for Gas Safe registered heating engineers
- Loft Conversion Insurance — Project cover for loft conversion specialists
- Electricians Insurance — Liability and tools cover for electrical contractors
- Plumbers Insurance — Public liability and professional cover for plumbers
- Fencing Contractors Insurance — Public liability for fencing and boundary contractors
Speak to a UK insurance broker
Our brokers are available Monday to Friday 9am to 5:30pm. Call 020 8908 2426, message us on WhatsApp 07954 331362, or email hello@premier-insurance.co.uk. Visit our office at 49 Grosvenor Street, London, W1K 3HP. You can also request a callback or learn more about our team.